Yamaha 150F Page 60 Owner'S Manual Download | Manualshive

Page: 60 / 90

background image

Operation

54

3.

Pull the tilt support lever toward you to
support the engine.

WARNING! After

tilting the outboard motor, be sure to
support it with the tilt support knob or
tilt support lever. Otherwise the out-
board motor could fall back down
suddenly if oil in the power trim and
tilt unit or in the power tilt unit loses
pressure.

[EWM00262]

NOTICE:

Do not use

the tilt support lever or knob when
trailering the boat. The outboard mo-

tor could shake loose from the tilt
support and fall. If the motor cannot
be trailered in the normal running po-
sition, use an additional support de-
vice to secure it in the tilt position.
For more detailed information, see
page 57.

[ECM01641]

4.

Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch “

” (down) to retract the

trim rods.

NOTICE:

Be sure to retract

the trim rods completely during
mooring. This protects the rods from
marine growth and corrosion which
could damage the power trim and tilt
mechanism.

[ECM00251]

EMU33120

Procedure for tilting down (power
trim and tilt models)

1.

Push the power trim and tilt switch “

”

ZMU04602

UP

UP

ZMU03523

ZMU03432

ZMU03997

«
...
58
59
60
61
62
...
»

Summary of Contents for 150F



























































































Reviews:

No comments

Related manuals for 150F

Brand: Biostar Pages: 61

Kontron mITX-CFL-S

Brand: S&T Pages: 8

Brand: MSI Pages: 76

Brand: IBASE Technology Pages: 91

Brand: Biostar Pages: 63

Brand: Renesas Pages: 30

Brand: Gigabyte Pages: 96

Brand: Aura Light Pages: 8

Brand: Avalue Technology Pages: 80

Brand: Wolfson Pages: 12

MVME61006E-0161

Brand: Emerson Pages: 100

MVME6100 Series

Brand: Emerson Pages: 118

Brand: Emerson Pages: 122

Brand: Emerson Pages: 138

Brand: Emerson Pages: 146

Brand: Emerson Pages: 160

Brand: Abit Pages: 80

MCU FLASH WRITER

Brand: Toshiba Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands