Components
20
EMU26090
Main switch
The main switch controls the ignition system;
its operation is described below.
●
“
”
(off)
With the main switch in the “
” (off) posi-
tion, the electrical circuits are off, and the key
can be removed.
●
“
”
(on)
With the main switch in the “
” (on) posi-
tion, the electrical circuits are on, and the key
cannot be removed.
●
“
”
(start)
With the main switch in the “
” (start) po-
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the “
” (on) position.
EMU32052
Power trim and tilt switch on remote
control
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pressing the switch “
” (up) trims the
outboard motor up, and then tilts it up. Press-
ing the switch “
” (down) tilts the outboard
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position. For instructions
on using the power trim and tilt switch, see
pages 50 and 53.
EMU26153
Power trim and tilt switch on bottom
engine cowling
The power trim and tilt switch is located on
the side of the bottom engine cowling. Press-
ing the switch “
” (up) trims the outboard
motor up, and then tilts it up. Pressing the
switch “
” (down) tilts the outboard motor
ZMU03903
ON
OFF
START
ON
OFF
START
ZMU04566
