Specifications and requirements
10
25.0 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
1.86 (26/14)
Trim and tilt system:
Power trim and tilt
Propeller mark:
150FETO M
175DETO M
200FETO M
L200FETO ML
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Fuel tank capacity:
24 L (6.34 US gal, 5.28 Imp.gal)
Recommended engine oil:
YAMALUBE 2-stroke outboard motor
oil
Lubrication:
Oil injection
Engine oil tank capacity:
0.9 L (0.95 US qt, 0.79 Imp.qt)
Remote oil tank capacity:
10.5 L (11.10 US qt, 9.24 Imp.qt)
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
150FETO 0.980 L
(1.036 US qt, 0.862 Imp.qt)
175DETO 0.980 L
(1.036 US qt, 0.862 Imp.qt)
200FETO 0.980 L
(1.036 US qt, 0.862 Imp.qt)
L200FETO 0.870 L
(0.920 US qt, 0.766 Imp.qt)
Tightening torque for engine:
Spark plug:
25.0 Nm (2.55 kgf-m, 18.4 ft-lb)
Propeller nut:
55.0 Nm (5.61 kgf-m, 40.6 ft-lb)
Noise and vibration level:
Operator sound pressure level
(ICOMIA 39/94 and 40/94):
200FETO 80.1 dB(A)
L200FETO 80.1 dB(A)
EMU33553
Installation requirements
EMU33563
Boat horsepower rating
WARNING
EWM01560
Overpowering a boat can cause severe
instability.
Before installing the outboard motor(s), con-
firm that the total horsepower of your mo-
tor(s) does not exceed the boats maximum
horsepower rating. See the boat’s capacity
plate or contact the manufacturer.
EMU33571
Mounting motor
WARNING
EWM01570
●
Improper mounting of the outboard mo-
tor could result in hazardous condi-
tions such as poor handling, loss of
control, or fire hazards.
●
Because the motor is very heavy, spe-
cial equipment and training is required
to mount it safely.
Your dealer or other person experienced in
proper rigging should mount the motor using
correct equipment and complete rigging in-
structions. For further information, see page
33.
EMU33581
Remote control requirements
WARNING
EWM01580
●
If the engine starts in gear, the boat can
