Yamaha 150F Owner'S Manual Download

Page: 80 / 90

Maintenance

Twin engines

EMU29371

Disconnecting the battery

Turn off the battery cut-off switch (if
equipped) and main switch.

NOTICE:

they are left on, the electrical system
can be damaged.

[ECM01930]

Disconnect the negative cable(s) from
the negative (-) terminal.

NOTICE:

Al-

ways disconnect all negative (-) ca-
bles first to avoid a short circuit and
damage to the electrical system.

[ECM01940]

Disconnect the positive cable(s) and re-
move the battery from the boat.

Clean, maintain, and store the battery
according to the manufacturer’s instruc-
tions.

1. Starboard side engine
2. Port side engine
3. Red cable
4. Black cable
5. Isolator lead with circuit protection
6. Fuse
7. Battery for starting
8. Battery for accessories
9. Negative connecting cable

ZMU05941

Summary of Contents for 150F



























































































Search results

Summary of Contents for 150F

Reviews:

Related manuals for 150F

Brands by name

Popular brands

Yamaha 150F, Owner'S Manual

Search results

Summary of Contents for 150F

Reviews:

Related manuals for 150F

Brands by name

Popular brands