Yamaha 01V96, Owner'S Manual

Page: 67 / 334

Mixing Recorded Tracks into Stereo (Mixdown)
67
01V96—Owner’s Manual
5
Tutorial
4 Rotate the Parameter wheel and select “2. Reverb Room”
For purposes of this tutorial, select this room reverb program.
5 Move the cursor to the RECALL button located to the left of the list, then
press [ENTER].
Effect program “Reverb Room” is loaded into Effects processor 1.
6 Press the LAYER [17–32] button.
Input Channel Layer 17–32 is selected for control from the channel
strip section.
7 Press the FADER MODE [AUX1] button.
The button indicator lights up.
While the [AUX 1]–[AUX 8] button indicators are lit, faders 1–16 control the Aux 1–8 send
levels.
In this example, the faders control the send level of the signals routed from Input Channels
17–32 to Aux 1 (Effects processor 1 input).
8 While playing back the recording on the digital MTR from the beginning,
operate faders 1–16 to adjust the send level of the signals routed from Input
Channels to Effects processor 1.
9 To adjust the effect return level, use the rotary level control located on the
left side of the ST IN section on the top panel.
You can view the current level in the upper-right corner of the display.
Tip: To edit the effect parameters, press the [EFFECT] button
repeatedly until the Effect | FX1 Edit page appears (see page 157).
Tip: To reset the fader 1–16 function to normal mode, press the FADER MODE [HOME]
button.