Yamaha 01V96, Owner'S Manual

Page: 65 / 334

Mixing Recorded Tracks into Stereo (Mixdown)
65
01V96—Owner’s Manual
5
Tutorial
Input Channel 17–32 signals input from Tracks 1–16 of the digital MTR are now routed
through the Stereo Bus, to the STEREO OUT and 2TR OUT DIGITAL connectors.
5 Use the PAN parameter controls for Input Channels 17–32 on the page to
adjust the panpot for each track.
6 Raise the [STEREO] fader to 0 dB.
7 While playing back the recording on the digital MTR from the beginning,
operate faders 1–16 to adjust the mix balance among the tracks.
• EQ’ing the track signals
Select the desired channel by pressing the corresponding [SEL] button, press the [EQ] but-
ton, then press the [F1] button to display the EQ Edit page (see page 84). Alternatively,
adjust the EQ parameters using the buttons and controls in the SELECTED CHANNEL sec-
tion.
• Compressing the track signals
Select the desired channel by pressing the corresponding [SEL] button, press the [DYNAM-
ICS] button, then press the [F4] button to display the Dynamics | Comp Lib page and recall
the desired compressor program (see page 82). Press the [DYNAMICS] button, then press
the [F3] button to display the Comp Edit page, then edit the compressor parameters.
• Gating the track signals
Select the desired channel by pressing the corresponding [SEL] button, press the [DYNAM-
ICS] button, then press the [F2] button to display the Dynamics | Gate Lib page. Then, recall
the desired gate program. Press the [DYNAMICS] button, then press the [F1] button to dis-
play the Gate Edit page, then edit the gate parameters.
Tip: Alternatively, you can adjust the pan settings by selecting the Input Channels via the
corresponding [SEL] button, then rotating the SELECTED CHANNEL [PAN] control.