Yamaha 01V96 Owner'S Manual Download Page 148

Page: 148 / 334

148

Chapter 13—Grouping Channels & Linking Parameters

01V96—Owner’s Manual

Using Fader Groups and Mute Groups

Follow the steps below to group faders or [ON] buttons for Input Channels or Output
Channels.

1 Press the DISPLAY ACCESS [PAIR/GROUP] button repeatedly until one of the

pages that contains the desired group and channels appears.

- In Fader page

This page enables you to set Fader groups (A–H) for Input Channels 1–32 and ST IN
Channels 1–4.

- Out Fader page

This page enables you to set Fader groups (Q–T) for Bus Outs (1–8), Aux Outs (1–8)
and Stereo Out.

- In Mute page

This page enables you to set Mute groups (I–P) for Input Channels 1–32 and ST IN
Channels 1–4 respectively.

- Out Mute page

This page enables you to set Mute groups (U–X) for Bus Outs (1–8), Aux Outs (1–8) and
Stereo Out.

• In Fader page

• In Mute page

Summary of Contents for 01V96















































































































































































































































































































































Search results

Summary of Contents for 01V96

Reviews:

Related manuals for 01V96

Brands by name

Popular brands

Yamaha 01V96, Owner'S Manual

Search results

Summary of Contents for 01V96

Reviews:

Related manuals for 01V96

Brands by name

Popular brands