![background image](http://html1.mh-extra.com/html/yakima/locknload-series/locknload-series_installation-manual_3362000012.webp)
28-13-011-Rev4
12/17
24
BAR PLACEMENT
Carefully place a Bar assembly over Nut Plates, ensuring spacing is correct as
shown in the previous Step.
Take care not to damage vehicle.
Position Legs
along Bar until
both legs are securely positioned on Nut Plates within Track.
SECURE BAR
ASSEMBLY TO TRACKS
From the LockNLoad
Track Kit, insert 1 x M6
Hex Screw through
the two outer holes on
Legs into Nut Plate as
shown.
Loosely secure Screws
using a 5 mm ball end
Allen Key.
25
=
ADJUST BAR OVER HANG
Use a Tape Measure to ensure even Bar overhang on each side, re-adjust if
required by sliding bar along legs.
26
=