28-13-011-Rev4
5/17
ALIGN AND SECURE TRACK
Place Track into roof channel, ensuring Track orientation is correct as shown.
Align Track and eliminate movement within the roof channel during spot drilling by
inserting M8 Button Head Screws into each of the mounting holes through track.
Secure using the supplied Allen Key.
Isuzu D-Max SX models secured using holes 1, 2 and 4.
9
Vehicle Front
Foam Tape
Foam Tape
SPOT DRILL RIVET HOLES
Using the supplied 4.9 mm Drill Bit, drill
each of the applicable rivet holes as
shown below.
Start from the rear of the
vehicle working consecutively frontward.
Ensure the Track does not move during
this process by maintaining downward
pressure on the Track while spot drilling
holes. Use the help of an assistant if
required. Once complete, remove Track
taking care not to scratch vehicle.
10
Vehicle Front
Holden Colorado / Isuzu D-Max LS, LS-U, LS-M
Isuzu D-Max SX
Vehicle Front
NOTE
- image as
viewed from above
Rivet holes
Drill
frontward
Rivet holes
NOTE
- image as
viewed from above
