28-13-011-Rev4
15/17
Position front and rear Bars along Tracks as required, ensuring there is a minimum
distance of 700 mm between each Bar.
Measure from the centre of each Leg as shown.
35
M6 HEX SCREW ASSEMBLY
From the LockNLoad Track
Kit, assemble 1 x M6 Spring
Washer and 1 x M6 Washer
onto each M6 Hex Screw.
Insert through the outer
holes on Legs into Nut
Plates as shown.
36
BAR FITMENT
Slide Nut Plates in Track into position for Bar placement (it doesn’t have
to be exact). Place Bar assembly onto Tracks, carefully locating the four
central raised notches on base of Legs into the cut outs on Nut Plates as
shown.
Take care not to damage vehicle.
Repeat for remaining Bar.
34
≥
700 mm
