![background image](http://html1.mh-extra.com/html/yakima/locknload-series/locknload-series_installation-manual_3362000011.webp)
28-13-011-Rev4
11/17
BAR INSTALLATION
REMOVE LEG COVERS
Using the keys supplied
in the LockNLoad Leg
Kit (sold separately),
remove all Leg Covers.
INSERT LEGS
Slide the pre-assembled Leg
assemblies into the underside
channel of LockNLoad Bars.
If Leg assemblies
will not slide in,
loosen Screws to
increase gap.
From the LockNLoad Bar
Kit (sold separately), remove
Plastite Screw from each Bar
end using a #2 Phillips Head
Screwdriver and pull out End
Caps from Bars.
Keep all parts aside for
later installation.
REMOVE END CAPS FROM BARS
20
BAR LOCATION
IMPORTANT: Before beginning Bar installation, identify where along the Track
you want the Front and Rear Bars fitted.
We recommend a minimum of 700 mm between Bars.
≥
700 mm
21
22
23