![background image](http://html1.mh-extra.com/html/yakima/locknload-lightenup/locknload-lightenup_manual_3359511002.webp)
Instruction #28-13-336 Rev.3 - Page 2 of 13
1
CONFIGURATIONS.
),5677,0(,167$//$7,21
Ă
Please read instructions carefully before installation.
Ă
Check the contents of kit. Contact your YAKIMA dealer if any parts appear missing or damaged.
Ă &OHDQ\RXUURRIUDFNSODWIRUPSULRUWRˁLWWLQJWKH/RFN1/RDG/LJKWHQ8S/LJKW%UDFNHWV
Ă
Place these instructions in the vehicle’s glove box after installation is complete.
ATTACH BUMP ON TO BRACKET BASES (DOWNWARDS ORIENTATION ONLY).
2
The light bracket base can be mounted to your bar or Platform orientated up or down as shown.
Side mounted with arm
angled down
Side mounted with
arm angled up
Top mounted
Bottom mounted
7KHUHDUHGLIIHUHQWDUPPRXQWLQJFRQˁLJXUDWLRQVIRUHDFKEDVHRULHQWDWLRQDVVKRZQ
The bump on tape is to be applied to the inside surface of down facing
bracket bases only. Remove backing tape from bump on strips and
ˁLUPO\DSSO\WKHPWRWKHXQGHUVLGHRIHDFKEUDFNHWEDVHDVVKRZQ
NOTE:
This step
is not required for
/RFN1/RDGEDUV
or any mounting
surface that is
already protected.
2X