![background image](http://html1.mh-extra.com/html/yakima/locknload-lightenup/locknload-lightenup_manual_3359511003.webp)
Instruction #28-13-336 Rev.3 - Page 3 of 13
3
ASSEMBLE BRACKETS.
Assemble the base brackets and arm brackets
in the chosen orientation (refer to step 1 for
FRQˁLJXUDWLRQRSWLRQVXVLQJWZR0[:DVKHUV
WZR0[PPORFNZDVKHUVDQGWZR0[PP
screws as shown for each bracket assembly. Tighten
DOOVFUHZVWR1PZLWKWKHSURYLGHG7RU[ZUHQFK
NOTE:
Example orientation shown is of the base
down with the arms side mounted and angled down.
This is best suited to mounting long Light Bars.
7 Nm
2X
4
4
a
4
a
4
Select the correct mounting hardware option as shown below.
Platform and HD Bar
use M6 slot nuts.
/RFN1/RDGEDUVXVH
06SULQJ1XWV
SELECT CORRECT MOUNTING HARDWARE.
INSERT MOUNTING HARDWARE
- LockNLoad Crossbars
INSERT MOUNTING HARDWARE
/RFN1/RDG3ODWIRUP
NOTE:
Light
brackets can
EHˁLWWHGWRDOO
4 sides of the
/RFN1/RDG
Platform.
Insert four M6 slot nuts into the platform channel
where you want to mount your light accessory.
Refer to step 8 for positioning information.
Insert four M6 spring nuts into the crossbar channel
where you want to mount your light accessory. Push
the spring nuts down into the crossbar channel and
twist to lock them into place as pictured. Refer to
step 6 for positioning information.
4X
4X
HD BARS
5HPRYHWRSLQˁLOO,QVHUW
two M6 slot nuts into
your HD Bar where you
want to mount your light
accessory. Refer to step 8
for positioning information.