background image

YAESU KEIKOGYO CO., LTD.

39-8, Senju Motomachi, Adachi-Ku,

Tokyo, 120-0041, Japan
Phone    81-3-3888-8751
Fax        81-3-3888-1592

PLEASE VISIT OUR WEB SITE

  

http://www.yaesu1965.com/

16

We warrant to the original purchaser of the product that will be free

form defects in material or workmanship for as long as the original

purchaser owns the product, when given normal wear and proper

usage.

The limited warranty for the machine shall be for a period of 180 days

form  the date of purchase.  

The spare parts such as Cutting Blades, Rollers, are not covered

under the warranty period as they are considered as "wear parts".

This warranty is only valid if the product:

   

Was not damaged while being installed.

   

Was operated in accordance with products's specifications,

       instructions and any technical support directions.

   

Was not modified or damaged by tempering, user error, accident,

       disaster, abuse, misuse, power supply, power application, 

       alternation, repair, modification, a fix or replacement by someone

       other than the original product.

Warranty

14K27

Summary of Contents for ZCUT-9GR

















Reviews: