OWNERS GUIDE TO INSTALLATION
AND OPERATION
Fully Automatic
Water Softeners
SINGLE TANK
CABINET MODELS
TWO TANK MODELS
SAFETY INFORMATION
• Read the instructions carefully and learn the specific
details regarding installation and use. Failure to follow
them could cause serious bodily injury and/or property
damage.
• Make certain the electrical outlet is grounded by
having it checked by an electrician or by using a UL
Listed Circuit analyzer. Units are furnished with 3-prong
grounded plugs to protect you against the possibility of
electrical shock.
Do not under any circumstances
remove the ground prong and
never splice or cut the electrical cord.
• The outlet must be within reach of the power cord. Do
not use an extension cord. Extension cords that are too
long or too light do not deliver sufficient voltage to the
unit and could present a safety hazard if the insulation
were to become damaged. The receptacle should be
located four (4) feet above the basement floor to guard
against the possibility of immersion.
Disconnect power at the main
electrical box before installing or
servicing the unit. Do not plug in unit or change
fuses while standing on wet or damp surfaces and
do not touch any other metal surfaces while plug-
ging in product or changing fuses. Do it with one (1)
hand while keeping the other hand free.
• Check to be sure your power source is capable of
handling the voltage requirements of the unit. Plug into
a dedicated grounded receptacle which contains a fuse
or circuit breaker of 20 amps or less.
• All water treatment installations must conform to local
plumbing, electrical and sanitation codes. These codes
are established for your protection.
INSTALL WATER CONDITIONER IN AN AREA PROTECTED FROM FLOODING, RAIN, DIRECT SUNLIGHT, DUST,
SNOW AND FREEZING. THE WARRANTY DOES NOT COVER DAMAGE INCURRED AS A RESULT OF EXPOSURE TO
WEATHER.
95 North Oak Street • Kendallville, IN 46755 • 800-545-2206
FW1741 A
