manualshive.com logo in svg

Yaesu ZCUT-9GR, Instruction Manual

Share
Download
Yaesu ZCUT-9GR Instruction Manual Download Page 13

FWD

REV

START

START

REV

   Roller Unit

      When waste of tape glue is found, please refer to page 14 and follow the procedure for cleaning

      ROLLER UNIT.

   Clean the Body

      Put neutral detergent on a damp cloth to clean the body.
      Do not use alcohol or solvent to clean the plastic parts.

Error Messages

The buzzer will has a sound then a message will flash and show on the

DISPLAY.

   E-02 Blade is Out of Position

A signal shows that the blade is not installed well or machine stops because

of the thickness or hardness of the tape.

◆

Turn the POWER SWITCH off.

◆

Remove the BLADE UNIT by releasing the BLADE UNIT RELEASING

    LEVER then lift the assembly out of the body.

◆

Turn the POWER SWITCH on.

◆

Press the FWD BUTTON and feed -in the tape once, cut the tape in between

    the TAPE OUTLET and the BLADE UNIT by scissor.

◆

Press the REV BUTTON to remove the tape.

◆

Clean the BLADE UNIT and lubricate the LOWER BLADE GUIDE.

◆

Check the lower blade position and replace the BLADE UNIT.

   E-03 Motor is Stopped

Indicates that the motor is stopped because of overload.

◆

Press the START BUTTON to clear the error message.

◆

Press the REV BUTTON to remove the tape.

◆

Turn the POWER SWITCH off.

◆

Check the BLADE UNIT and TAPE OUTLET carefully.

◆

Clear and take away the spare tape waste or sticky residue by using

    tweezers.(Clean ROLLER UNIT as depens on the condition.)

Do not touch the Blade when you  are correcting an error under POWER SWITCH

is on.

Do not use the tape if static electricity generates over 1000V.

It may cause failure to the machine.

Turn off the POWER SWITCH and stop using the machine.

If the machine cannot work normally after correcting the error.

It seems that nothing wrong without any error messages.

POWER SWITCH IS OFF

POWER SWITCH IS ON

REMOVE BLADE UNIT

CLEAR THE ERROR

CLEAR THE ERROR

CLEAR THE BLADE

FEED THE TAPE

REMOVE THE TAPE

REMOVE THE TAPE

SET THE TAPE

SET THE TAPE

13

Summary of Contents for ZCUT-9GR

















Reviews:

No comments

Brands by name

Popular brands

Load more brands