VX-2R O
PERATING
M
ANUAL
63
S
ET
(
M
ENU
)
M
ODE
Set Mode Item
1 [APO]
2 [AR BEP]
3 [AR INT]
4 [ARS]
5 [ATT]
6 [BCLO]
7 [BEEP]
8 [BELL]
9 [BSYLED]
10 [CH CNT]
11 [CK SFT]
12 [CW ID]
13 [DC VLT]
14 [DCS CD]
15 [DCS RV]
16 [DIMMER]
17 [DTMF]
18 [DTMF S]
19 [EDG BP]
20 [EMG S]
21 [HLFDEV]
22 [HM/RV]
23 [INT MD]
24 [LAMP]
25 [LOCK]
26 [M/T-CL]
27 [MW MD]
28 [NAME]
29 [NM SET]
30 [OPNMSG]
31 [RESUME]
32 [RF SQL]
33 [RPT]
34 [RX MD]
35 [RXSAVE]
36 [S SCH]
37 [SCNLMP]
38 [SHIFT]
39 [SKIP]
40 [SPLIT]
41 [SQL]
42 [SQL TYP]
43 [STEP]
44 [TN FRQ]
45 [TOT]
46 [TXSAVE]
47 [VFO MD]
48 [WX ALT]
Function
Setting of the Automatic Power-Off feature.
Selects the Beep option during ARTS operation.
Selects the Polling Interval during ARTS operation.
Enables/Disables the Automatic Repeater Shift function.
Enables/Disables the receiver Front-end Attenuator.
Enables/Disables the Busy Channel Lock-Out feature.
Enables/Disables the Keypad beeper.
Selects the number of CTCSS/DCS Bell ringer repetitions.
Enables/Disables the BUSY LED while the Squelch is open.
Selects the Channel Counter Search Width.
Shifting of the CPU clock frequency.
Programs and activates the CW Identifier (used during ARTS operation).
Indicates the DC Supply Voltage.
Setting of the DCS code.
Enables/Disables “Inverted” DCS code decoding.
Setting of the Display brightness level.
Selects the DTMF Autodialer Memory Number.
Programming of the DTMF Autodialer.
Enables/Disables the Band-edge beeper while selecting the frequency by
the
DIAL
knob.
Select the alarms utilized when the Emergency function is engaged.
Reducing the Deviation level by 50 %.
Selects the function of the [
HM/RV
] key.
Selects the “Internet Connection” feature.
Selects the LCD/Keypad Lamp mode.
Selects the Control Locking lockout combination.
Selects the
MONI
key (just below the
PTT
switch) function.
Selects the method of selection of channels for Memory Storage.
Toggles the display indication between “frequency” and the channel’s
“Alpha/Numeric Tag.”
Stores Alpha-Numeric “Tags” for the Memory channels.
Selects the Opening Message that appears when the radio is powered on.
Selects the Scan Resume mode.
Adjusts the RF Squelch threshold level.
Sets the Repeater Shift Direction.
Selects the Receiving mode.
Selects the Receive-mode Battery Saver interval (“sleep” ratio).
Selects the Smart Search Sweep mode.
Enables/Disables the Scan lamp while paused.
Sets the magnitude of the repeater Shift.
Selects the Memory Scan channel-selection mode.
Enables/Disables split CTCSS/DCS coding.
Sets the Squelch threshold level.
Selects the Tone Encoder and/or Decoder mode.
Setting of the synthesizer steps.
Setting of the CTCSS Tone Frequency.
Setting of the TOT time.
Enables/Disables the Transmitter Battery Saver.
Selects or disables the VFO band edge limiting for the current band.
Enables/Disables the NOAA Weather Alert Feature.
Available Values
(Default:
Bold Itaric
)
OFF
/30MIN/1HOUR/3HOUR/
5HOUR/8HOUR
IN RNG
/ALWAYS/OFF
25SEC
/15SEC
ON
/OFF
OFF
/ON
ON/
OFF
ON
/OFF
OFF
/1/3/5/8/CONT
ON
/OFF
±5 MHz
/±10 MHz/±50 MHz/
±100 MHz
OFF
/ON
---
---
104 standard DCS codes (
023
)
DISABL
/ENABLE
LVL 0 -
LVL 12
DTMF1 - DTMF 9, or
MANUAL
---
OFF
/ON
BEEP/STROBE/
BP+STR
/BEAM/
BP+BEM/CW/BP+CW
OFF
/ON
REV
/HOME
WIRES
/LINK
KEY
/CONT/OFF
KEY
/DIAL/K+D/PTT/K+P/D+P/ALL
MONI/T-CALL
ø
1
NEXT
/ LOWER
FREQ
/ALPHA
---
DC
/MSG/OFF
3 SEC/
5 SEC
/10 SEC/BUSY/HOLD
S1/S2/S3/S4/S5/S6/S8/S9+/
OFF
SIMP/-RPT/+RPT
ø
2
AUTO
/N-FM/AM/W-FM
200MS
(1:1)/300MS(1:1.5)/
500MS(1:2.5)/1S(1:5)/2S(1:10)/
OFF
SINGLE
/CONT
ON
/OFF
---
OFF
/SKIP/ONLY
OFF
/ON
Narrow FM: LVL 0 - LVL 15 (
LVL 1
),
Wide FM: LVL 0 - LVL 8 (
LVL 2
)
OFF
/TONE/TSQ/DCS/RV TN
5/9/10/12.5/15/20/25/50/100 kHz,
or
AUTO
50 standard CTCSS tones
(
100.0 Hz
)
OFF
/1M/3M/5M/10M (Minutes)
OFF
/ON
BAND
/ALL
OFF
/ON
ø
1: Depends on transceiver version.
ø
2: Depends on operating band and transceiver version.
