Yaesu VX-2R Operating Manual Download Page 18

Page: 18 / 80

VX-2R O

PERATING

ANUAL

HANGING

THE

ECEIVING

ODE

The

VX-2R

provides for automatic mode changing when the radio is tuned to different

operating frequencies. However, should an unusual receiving situation arise in which you
need to change other receiving mode, just press the [

] key. The receiving modes avail-

able are:

AUTO

: Automatic mode setting per default values for the selected frequency range.

N-FM

: Narrow-bandwidth FM (used for voice communication)

W-FM

: Wide-bandwidth FM (used for high-fidelity broadcasting)

Amplitude Modulation

Unless you have a compelling reason to do so, leave the Automatic Mode
Selection feature on so as to save time and trouble when changing bands. If
you make a mode change for a particular channel or station, you can always

store that one channel into memory, as the mode setting will be memorized along with
the frequency information.

ISPLAY

IMMER

The LCD and keypad illumination level may be adjusted using the Set Mode.

Press and hold in the [

H/L

] key for one second to enter the Set mode.

Rotate the

DIAL

knob to select Set Mode Item 16:

DIMMER

Press the [

H/L

] key momentarily to enable adjustment of this Set Mode Item.

Rotate the

DIAL

knob to adjust the display illumination for a comfortable brightness

level. As you make the adjustment, you will be able to see the effects of your changes.

When you have completed the adjustment, press the

PTT

key to save the new setting

and exit to normal operation.

DVANCED

PERATION

Summary of Contents for VX-2R

















































































Search results

Summary of Contents for VX-2R

Reviews:

Related manuals for VX-2R

Brands by name

Popular brands

Yaesu VX-2R, Operating Manual

Search results

Summary of Contents for VX-2R

Reviews:

Related manuals for VX-2R

Brands by name

Popular brands