VX-2R O
PERATING
M
ANUAL
68
S
ET
(
M
ENU
)
M
ODE
4.
Repeat the previous step as necessary to complete the message (up to 16 characters).
5.
If you make a mistake, press the [
BAND
] key to back-space the cursor; now re-enter
the correct letter/number.
6.
Press the [
HM/RV
] key to delete all data after the cursor that may have been previ-
ously stored erroneously.
7.
When you have entered the message, press the [
H/L
] key momentarily to confirm the
message, then press the PTT key to save the settings and exit to normal operation.
Set Mode Item 21
[
HLFDEV
]
Function
: Reducing the Deviation level by 50 %.
Available Values
: OFF/ON
Default
: OFF
Set Mode Item 22
[
HM/RV
]
Function
: Selects the function of the [
HM/RV
] key.
Available Values
: REV/HOME
Default
: REV
REV:
Pressing the [
HM/RV
] key reverses the transmit and receive frequencies during
repeater operation.
HOME: Pressing the [
HM/RV
] key instantly recalls a favorite “Home” channel.
Set Mode Item 23
[
INT MD
]
Function
: Selects the “Internet Connection” feature.
Available Values
: WIRES/LINK
Default
: WIRES (sends a single DTMF digit at the beginning of each transmission)
Set Mode Item 24
[
LAMP
]
Function
: Selects the LCD/Keypad Lamp mode.
Available Values
: KEY/CONT/OFF
Default
: KEY
KEY:
Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
CONT: Illuminates the LCD/Keypad continuously.
OFF:
Disables the LCD/Keypad illumination
Set Mode Item 25
[
LOCK
]
Function
: Selects the Control Locking lockout combination.
Available Values
: KEY/DIAL/K+D/PTT/K+P/D+P/ALL
Default
: KEY
Note
: “K” = “Key;” “D” = “Dial;” and “P” = “PTT.”
S
ET
M
ODE
S
UMMARY
