VX-2R O
PERATING
M
ANUAL
42
Memory Bank Operation
The large number of memories available in the
VX-2R
could be difficult to utilize without
some means of organizing them. Fortunately, the
VX-2R
includes provision for dividing
the memories into as many as twenty Memory Banks, so you can categorize the memories
in a manner convenient to you. You may enter and exit the “Memory Bank” mode by a
single press of the [
BAND
] key, as we shall see below.
Assigning Memories to a Memory Bank
1.
Recall the memory channel to be assigned to a Memory Bank.
2.
Press and hold in the [
F/W
] key for one second, then rotate the
DIAL
knob to select the
Memory Bank number you want as the Memory Bank for this
channel (“
b 1
” ~ “
b20
,” which is found before memory chan-
nel “
1
”) .
3.
Press the [
F/W
] key momentarily.
4.
At this point, the memory channel data is copied into the Memory Bank.
Memory Bank Recall
1.
Press the [
V/M
] key, if needed, to enter the MR mode.
2.
Press the [
BAND
] key to activate the “Memory Bank” mode.The
Memory Bank number will appear on the display.
3.
Press the [
F/W
] key, then press the [
BAND
] key.
4.
Rotate the
DIAL
knob to select the desired Memory Bank
(“
BANK 1
” through “
BANK 20
”).
5.
Press the [
BAND
] key; now, as you rotate the
DIAL
knob to select memories, you will
observe that you can only select memory channels in the current memory bank.
6.
To change to another Memory Bank, press the [
F/W
] key, then press the [
BAND
] key;
now rotate the
DIAL
knob to select the new Memory Bank.
7.
To exit from Memory Bank operation, just press the [
BAND
] key. “
MEMORY
” will
appear on the display, indicating that you are now in the “regu-
lar” Memory Recall mode, without utilization of the Memory
Banks. The memories stored in the various Banks will remain
in those banks, however; you do not need to store them again.
M
EMORY
M
ODE
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
