VX-2R O
PERATING
M
ANUAL
57
Setting the Channel Counter Sweep Width
You may change the bandwidth of the Channel Counter. Available selections are ±5, ±10,
±50, and ±100 MHz (default: ±5 MHz).
Here is the procedure for setting the Channel Counter Bandwidth:
1.
Press and hold in the [
H/L
] key for one second to enter the Set mode.
2.
Rotate the
DIAL
knob to select Set Mode Item 10:
CH CNT
.
3.
Press the [
H/L
] key momentarily to enable adjustment of this
Set Mode Item.
4.
Rotate the
DIAL
knob to select the desired bandwidth.
5.
When you have made your selection, press the
PTT
key to save the new setting and
exit to normal operation.
C
HANNEL
C
OUNTER
O
PERATION
