VX-2R O
PERATING
M
ANUAL
71
Set Mode Item 36
[
S SCH
]
Function
: Selects the Smart Search Sweep mode.
Available Values
: SINGLE/CONT
Default
: SINGLE
SINGLE: The transceiver sweeps the current band once in each direction starting on the
current frequency. All channels where activity is present (up to 15 in each direc-
tion) are loaded into the Smart Search memories. Whether or not all 31 memo-
ries are filled, the search stops after one sweep in each direction.
CONT:
The transceiver makes a sweep in each direction as with the “SINGLE” mode,
but if all 31 channels are not filled after the first sweep, the radio continues
sweeping until they are all filled.
Set Mode Item 37
[
SCNLMP
]
Function
: Enables/Disables the Scan lamp while paused.
Available Values
: ON/OFF
Default
: ON
Set Mode Item 38
[
SHIFT
]
Function
: Sets the magnitude of the repeater Shift.
Available Values
: 0.00 - 99.95 MHz (50 kHz increments)
Default
: Depends on the operating band and transceiver version.
Set Mode Item 39
[
SKIP
]
Function
: Selects the Memory Scan channel-selection mode.
Available Values
: OFF/SKIP/ONLY
Default
: OFF
SKIP:
The scanner will “skip” the flagged channels during scanning.
ONLY: The scanner will only scan channels that are flagged (Preferential Scan List).
OFF:
All memory channels will be scanned (the “flag” will be ignored).
Set Mode Item 40
[
SPLIT
]
Function
: Enables/Disables split CTCSS/DCS coding.
Available Values
: OFF/ON
Default
: OFF
When this Set Mode Item is set to “ON,” you can see the following additional parameters
after the “RV TN” parameter while selecting the Set Mode Item 42:
SQL TYP
.
D CODE: DCS Encode only.
T DCS:
Encodes a CTCSS tone and Decodes a DCS code.
D TONE: Encodes a DCS code and Decodes a CTCSS tone.
Select the desired operating mode from the selections shown above.
S
ET
M
ODE
S
UMMARY
S
ET
(
M
ENU
)
M
ODE
