Yaesu FTM-6000R Advance Manual Download

Page: 36 / 37

34 WX ALT

Set the weather Alert Feature

Set the weather Alert Feature to notify of storms and hurricanes, ON or OFF.

OFF

Disables the Weather Alert Feature.

Enables the Weather Alert Feature.

35 BLT

Bluetooth

(Setting the Bluetooth

)

Make Bluetooth

settings and connect to a Bluetooth

headset.

For details, refer to “Bluetooth

Operation” in the Operating Manual.

BLT.LST (Bluetooth

Device List)

Displays a list of registered or searched Bluetooth

devices. You can select and con-

nect a Bluetooth

headset.

For details, refer to “Bluetooth

Operation” in the Operating Manual.

BLT.SAV (Bluetooth

save)

Set this to reduce the Bluetooth

headset battery consumption.

For details, refer to “Bluetooth

Operation” in the Operating Manual.

BLT.AF (Bluetooth

received audio output)

Set whether received audio is heard from both the Bluetooth

headset and the trans-

ceiver speaker, or only from the connected Bluetooth

device.

For details, refer to “Bluetooth

Operation” in the Operating Manual.

Summary of Contents for FTM-6000R






































Search results

Summary of Contents for FTM-6000R

Reviews:

Related manuals for FTM-6000R

Brands by name

Popular brands

Yaesu FTM-6000R, Advance Manual

Search results

Summary of Contents for FTM-6000R

Reviews:

Related manuals for FTM-6000R

Brands by name

Popular brands