Yaesu FTM-6000R, Advance Manual

Page: 34 / 37

31
DW RVRT (Turn the “Dual Watch Revert” feature ON or OFF during Dual Receive.)
Determines the operation of the PTT switch when pressed during the Dual Watch.
OFF
When a signal is received on the HOME Channel, duel watch
pauses. Press the PTT switch to transmit on the HOME Chan-
nel. Release the PTT switch to receive the HOME Channel for
about five seconds, then Dual Watch operation continues.
Press the PTT switch when scan is not on home channel, it
will transmit at that frequency and DW operation will continue.
ON
Press the PTT switch to transmit on the HOME Channel.
Release the PTT switch to receive the HOME Channel for
about five seconds, then Dual Watch operation continues.
24 SQL TYPE
Select [ 11 SQL TYPE ] to open the squelch only when a signal containing the speci-
fied tone or code is received.
For more details, see “Selecting the Squelch Type”. (
page 2)
25 SQL CODE
Set tone frequency or DCS code
The tone frequency may be selected from 50 frequencies (from 67.0 Hz to 254.1 Hz).
For more details, see “Setting CTCSS Tone frequency”. ( page 3)
The DCS code may be selected from 104 types (from 023 to 754).
For more details, see “Selecting the DCS Code”. ( page 5)
26 SQL EXP
Set the squelch code separately for Receive and transmit.
The squelch type can be set separately for transmit and receive.
OFF
Does not add squelch types for transmit and receive, respec-
tively.
ON
“DCS.ENC”, “TON.DCS” and “DCS.TSQ” setting values are
activated.
For more details, see “Selecting the Squelch Type”. ( page 2)
27 STEP
Set the frequency tuning step
Set the frequency step when the DIAL knob is turned, or when the [ UP ]/[ DWN ] key
on the microphone is pressed.
AUTO Step automatically changes according to operating frequency.)
5kHz / 6.25kHz
8.33kHz
*
/ 10kHz
12.5kHz / 15.0kHz
20.0kHz / 25.0kHz
50.0kHz / 100.0kHz
Changes at the selected frequency step.
* For the AIR band, the frequency step “8.33 kHz” can also be selected.