Yaesu FTM-6000R, Advance Manual

Page: 14 / 37

11
• Using the numeric key:
The DTMF codes from “0” to “9”, “A” to “D”, “
Û
” and “#” may be input.
“
Û
” is displayed “E”, “#” is displayed “F”.
• Using the DIAL knob:
Rotate the DIAL knob to set the DTMF code.
• • •

“0” to “9”

“A” to “F”

• • •
“
Û
” is displayed “E”, “#” is displayed “F”.
Press the DIAL knob to move the cursor to the right.
• Moving the cursor:
[ PMG pw ] key: Moves the cursor to the right
[ BAND grp ] key: Moves the cursor to the left
6. Press and hold the DIAL knob to set the DTMF code and return to the DTMF memory
channel select screen.
7. Press and hold the [ SQL back ] key to return to normal operation.
Transmitting the registered DTMF code
1. Press and hold the [ F menu ] key.
2. Rotate the
DIAL
knob to select [
09 DTMF
] then
press the
DIAL
knob.
3. Rotate the DIAL knob to select “ AUTO ”.
Default: MANUAL
4. Press the [ SQL back ] key.
5. Rotate the DIAL knob to select [ 10 DT TX ] then
press the DIAL knob.
6. Rotate the DIAL knob to select the desired channel (CH1 to CH9).
7. Press the DIAL knob.
The DTMF code registered in the DTMF memory channel is automatically transmitted.
• A DTMF code can also be sent by pressing and holding the PTT switch while pressing
the channel number on the microphone numeric keypad (0-9) to which the DTMF code
is registered.
• Even after releasing the PTT switch, the transmission continues until the DTMF code is
completed. The transceiver is automatically returned to receive mode.