Yaesu FTM-6000R, Advance Manual

Page: 23 / 37

20
Clone
The memory channels and settings in the menu list can be copied to another FTM-
6000R/E. This is convenient when matching the settings of associate stations that com-
municate frequently.
1. Turn both transceivers OFF.
2. Connect the optional clone cable “CT-166” to the DATA jack on the back of the main
bodies.
DATA jack DATA jack
Clone Cable “CT-166” (option)
3. Press and hold the [ F1 ] keys, and turn both trans-
ceivers ON.
“ CLONE ” is displayed on the screen.
4. On the transceiver to which data is to be copied,
press the DIAL knob.
“ CLN RX ” is displayed on the screen.
5. On the transceiver from which data is to be copied,
press the DIAL knob.
6. Rotate the DIAL knob to select “ CLN TX ”.
7. On the transceiver to which data is to be copied,
press the DIAL knob.
“ RCV.WAT ” is displayed on the screen.
8. On the transceiver from which data is to be copied,
press the DIAL knob.
“ SND.ING ” is displayed on the screen, and data
transfer begins.
9. When cloning is completed, the copy destination FTM-6000R/E will automatically
restart, and the copy source FTM-6000R/E will change from “ SND.ING ” to “ SND.
CMP ”.
10. This completes cloning (copying).
Turn both transceivers OFF, then disconnect the clone cable.
When “ERROR” appears on the screen during the clone operation, the operation has not
completed. Check the clone cable connection, and then repeat the procedure from the
beginning.