Yaesu FTM-350AR Operating Manual Download Page 38

Page: 38 / 60

FTM-350AR/AE O

PERATING

ANUAL

TX/RX G

ROUP

B06: VOX

Function

: Enables/Disables VOX operation.

Available Values

: OFF, REAR HAND-MIC, FRONT HAND-MIC, or INTERNAL MIC

Default

: OFF

OFF:

Disable VOX operation.

REAR HAND-MIC: Enable VOX operation for the microphone that is connected to the

rear panel MIC jack (located in the transceiver’s body).

FRONT HAND-MIC: Enable VOX operation for the microphone that is connected to the

front panel MIC jack (located in the control head).

INTERNAL MIC:

Enable VOX operation for the microphone that is connected to the

front panel microphone.

B07: VOX SENSITIVITY

Function

: Sets the VOX sensitivity.

Available Values

: MIN, LOW, NORMAL, HIGH, or MAX

Default

: NORMAL

B08: WIDE / NARROW AUTO

Function

: Selects the receiving mode.

Available Values

: AUTO, WIDE FM, FM, NARROW FM, or AM

Default

: AUTO

B09: WX ALERT

Function

:Enables/Disables the weather alert scan feature.

Available Values

: ON or OFF

Default

: OFF

ISCELLANEOUS

ETTING

(

ODE

PERATION

)

Summary of Contents for FTM-350AR





























































Search results

Summary of Contents for FTM-350AR

Reviews:

Related manuals for FTM-350AR

Brands by name

Popular brands

Yaesu FTM-350AR, Operating Manual

Search results

Summary of Contents for FTM-350AR

Reviews:

Related manuals for FTM-350AR

Brands by name

Popular brands