FTM-350AR/AE O
PERATING
M
ANUAL
45
SIGNALING G
ROUP
J01: BELL RINGER
Function
: Enables/Disables the Bell ringer function and selects Bell ringer repetitions.
Available Values
: OFF, 1 time, 3 times, 5 times, 8 times, or CONTINUOUS
Default
: OFF
When this item is enabled, the transceiver emits a “bell” sound when a signal is received
that contains a CTCSS tone, DCS code or CTCSS tone pair that matches the setting of the
decoder.
J02: DTMF MEMORY
Function
: Programs the DTMF string used in the DTMF autodialer and FRG DTMF com-
mands for the WiRES system.There are nine memories available.
1. Rotate the
left side
[
DIAL
] knob to select the DTMF memory register (1 - 9) into which
you wish to store.
2. Press the
left side
[
DIAL
] knob briefly.
3. Rotate the
left side
[
DIAL
] knob, or press one of the microphone’s keypad buttons, to
select the first digit of the DTMF string.
4. When you have selected the first digit of the DTMF string using the
left side
DIAL
knob, press the [
] key to move to the next digit.
5. Repeat steps 3 and 4 to program the remainder of the DTMF string.
6. You may backspace the cursor by pressing the [
] key.
7. Press the [
CLR
] key to clear any previously stored data, if desired.
8. Press the [
ENT
] key to save the setting.
J03: DTMF MODE
Function
: Enables/Disables the DTMF autodialer feature. See page 22 for details.
J04: PAGER CODE
Function
: Sets the Pager Code for Enhanced CTCSS Paging & Code Squelch. See page 15
for details.
M
ISCELLANEOUS
S
ETTING
(
S
ET
M
ODE
O
PERATION
)
