FTM-350AR/AE O
PERATING
M
ANUAL
22
DTMF O
PERATION
M
ANUAL
DTMF T
ONE
G
ENERATION
1. Press the microphone
PTT
switch to begin transmission.
2. While transmitting, press the desired number keys on the microphone.
3. When you have sent all the digits desired, release the
PTT
switch.
DTMF A
UTODIALER
1. To store a telephone number to a DTMF memory register, press the [
SET
] key and
choose the “
SIGNALING
” group, then choose item “
J02 DTMF MEMORY
”. Choose
a DTMF register and enter the telephone number. See page 45.
2. Then Set Mode item “
J03 DTMF MODE
” in the “
SIGNALING
” group to “
ON
”. See
page 45.
3. Press the [
ESC
] key three times, to exit from the Set Mode, and activate the DTMF
Autodialer.
4. To send the telephone number, perform the following procedure while pressing the
PTT
switch:
1) Press the [
DTMF
] key (located at the left side of the [
POWER
] key while trans-
mitting).
2) Rotate the [
DIAL
] knob to select the DTMF memory register corresponding to the
telephone number you wish to send.
3) Press the [
DTMF
] key again to transmit the telephone number.
5. To disable the DTMF Autodialer, select the “
OFF
” selection in the Set Mode item “
J06
DTMF MODE
”.
You may send a telephone number by pressing the microphone numeric keys ([
1
] through
[
9
]) corresponding to the DTMF memory string you wish to send.
