Chassis Management Displays
Field
Means
A status that indicates whether or not this host is sending parameters to a
module in the chassis. Current indicates that all parameters are up-to-
date. Other status messages indicate that a parameter update is being
attempted or is in progress. These states include the following:
Current
Behind
Verifying
Bus Busy
Retrying
Failing
Hold Down
Chassis
Parameter
Status
Path
The pathname to a parameter file on a UNIX host for TFTP parameter
updates.
The maximum number of parameter servers where this processor module
can attempt to obtain parameters.
Parameter
Server
Limit
The current number of parameters server where this processor module
can attempt to obtain parameters.
Parameter
Servers
The number of parameter servers that this module tried to reach but could
not reach.
Rejected
Servers
Bad parameter
Messages
The number of messages from the parameter server that the processor
module could not interpret for some reason. Usually, 0 is the value in this
field.
The version of the parameter file that is stored in the memory of the
processor module since it was last initialized. The processor module
creates a new version of the parameter file when you change parameters
with the DEFINE or PURGE commands. When this number matches the
version indicated in the Version field, the parameter server and the
processor module have the same version of the parameter file.
Last Update
Version
The day that the processor module last attempted to update parameter
information stored at parameter servers.
Last Update
Date
The time that the processor module last attempted to update parameter
information stored at parameter servers.
Last Update
Time
Whether or not the processor module is attempting to update parameter
information at any parameter server. Idle indicates that the processor
module is not currently attempting an update. This is a normal storage
state. All other storage states indicate that an update is being attempted or
is in progress.
Storage state
0020
99
