Chapter 2
Entering Chassis Management Commands
This chapter explains how to log on to the command interface of a processor module and
enter the chassis management commands. This chapter includes the following sections:
•
Logging On to the Command Interface of a Processor Module
•
Using the CHASSIS CONSOLE SLOT command
•
Entering Commands
•
Editing the Command Line
The chassis management commands include the following:
The command that allows you to log on to other Type 2 modules in the chassis through the
LMB:
CHASSIS CONSOLE SLOT
The commands that changes the operational link map:
DEFINE [SERVER] CHASSIS SLOT
Commands that change initialization record parameters:
DEFINE [SERVER] CHASSIS SLOT DUMP PROTOCOL
DEFINE [SERVER] CHASSIS SLOT LOAD INTERNET ADDRESS
DEFINE [SERVER] CHASSIS SLOT LOAD INTERNET [LOAD] GATEWAY
DEFINE [SERVER] CHASSIS SLOT LOAD INTERNET [LOAD] FILE
DEFINE [SERVER] CHASSIS SLOT LOAD INTERNET [LOAD] HOST
DEFINE [SERVER] CHASSIS SLOT LOAD PROTOCOL
DEFINE [SERVER] CHASSIS SLOT LOAD SOFTWARE
DEFINE [SERVER] CHASSIS SLOT LOADDUMP LINK
DEFINE [SERVER] CHASSIS SLOT LOADDUMP ENABLED | DISABLED
DEFINE [SERVER] CHASSIS SLOT LOADDUMP DEFAULT
The command that resets or inhibits a processor module or power supply:
[DEFINE SERVER] RESET CHASSIS [HOLD]
0020
20
