Managing Initialization Parameters
Where
Means
usage
One of the following keywords, which indicate whether you are specifying
a protocol for a software load image or a parameter file:
IMAGE [LOAD]
PARAMETERS [LOAD]
protocol
One of the following keywords which represent different protocols, or the
keyword ALL:
Protocol
Means
CARD
Local flash card protocol
XMOP
Xyplex MOP Protocol
MOP
Digital Equipment Corporation Maintenance Operations
Protocol
BOOTP
Bootstrap protocol
RARP
UNIX Reverse Address Resolution Protocol
DTFTP
UNIX Directed Trivial File Transfer Protocol (software
load image only)
ALL
All protocols (you cannot disable all load protocols)
Enable the protocol in the initialization records you specify. You can
enable only one protocol in the command line, unless you use the keyword
ALL to enable all protocols.
ENABLED
Disable the protocol in the initialization records you specify. You cannot
use the keyword ALL to disable all load protocols.
DISABLED
Examples
1. This example enables DTFTP as a protocol to use for the software load
image in the primary initialization record of a WAN bridge/router in
slot 4. (Enabling this protocol requires that you specify DTFTP
information with the DEFINE CHASSIS SLOT LOAD INTERNET
commands.)
Xyplex>> define chassis slot 4 load primary image protocol
dtftp enabled
Xyplex>>
2. This example enables MOP as the protocol to use when loading the
parameter file from the primary initialization record of the local router
in slot 5.
Xyplex>> define chassis slot 5 load primary parameters
protocol mop enabled
Xyplex>>
70
0020
