Managing the Operational Link Map
Figure 3-8 shows the Chassis Slot Status display for a LAN bridge/router in slot 4 with the
default settings in the Link Mappings section of the display.
Slot 4 Status:
Operational
Firmware Version:
410000
Processor Module:
BR/410
Proc Mod. Serial #:
000076594
I/O Module:
BR/412
I/O Mod. Serial #
000034512
Installed Memory:
4 Megabytes
SCM Version:
100000
802.x Address
08-00-87-01-C7-65
Uptime:
5 11:27:04
IP Address:
140.179.80.113
Link
Mappings
Worst
Case
Power
--------------------
---------------------
Ethernet 1 Segment A
+5V
17.5W
Ethernet 2 Segment B
+12V
9.6W
Ethernet 3 Segment C
-12V
0.0W
Ethernet 4 External 4
---------------------
Total
27.1W
Figure 3-8. A Show Chassis Slot Status Display for a LAN Bridge/Router 410
To connect any of the first 3 Ethernet links to an external LAN, you need only specify
EXTERNAL in the command line. The LAN bridge/router automatically associates the
link with the correct external LAN. For example, these commands connect Ethernet 2 to
external LAN 2, and Ethernet 3 to external LAN 3:
Xyplex>> define chassis slot link ethernet 2 external
Xyplex>> define chassis slot link ethernet 3 external
0020
41
