Xylem WTW SensoLyt 700 SW, Operating Manual

Page: 8 / 44

Safety TriOxmatic
®
700 (SW)
50 ba25307e06 07/2015
2.3 General safety instructions
Function and
operational safety
The sensor left the factory in a safe and secure technical condition.
The failure-free function and operational safety of the sensor is only
guaranteed if the generally applicable safety measures and the special
safety instructions in this operating manual are followed during its use.
The failure-free function and operational safety of the sensor is only
guaranteed under the environmental conditions that are specified in
chapter 7 T
ECHNICAL DATA
.
The specified temperature (chapter 7 T
ECHNICAL DATA
) must be
maintained during the operation and transport of the sensor. Protect
the sensor, particularly against frost or overheating.
Safe operation If safe operation is no longer possible, the sensor must be taken out of
operation and secured against inadvertent operation.
Safe operation is no longer possible if the sensor:

has been damaged in transport

has been stored under adverse conditions for a lengthy period of
time

is visibly damaged

no longer operates as described in this manual.
If you are in any doubt, contact the supplier of your sensor.
Obligations of the
operator
The operator of the sensor must ensure that the following rules and
regulations are followed when dealing with hazardous substances:

EEC directives for protective labor legislation

National protective labor legislation

Safety regulations

Safety data sheets of the chemical manufacturer.