Maintenance, cleaning, disposal, and replacement
TriOxmatic
®
700 (SW)
60
ba25307e06
07/2015
Cleaning
Caution
Acetic acid irritates the eyes and the skin. When handling acetic
acid, always wear protective gloves and protective goggles.
Caution
Clean the membrane very carefully!
Make sure the membrane is not damaged, e.g. by sharp-edged
objects, by laying it on sharp stones, etc.
1
Pull the sensor out of the sample.
2
Get rid of any coarse contamination on the sensor (e.g. brush
it off in a bucket of tapwater, wash it down with a hose or wash
it off with a cloth).
3
Unscrew the protective hood from the sensor.
4
Carefully
clean the sensor shaft and membrane as specified
in the C
LEANING
AGENTS
section.
5
Then, rinse it thoroughly with tap water.
6
Also clean and rinse the protective hood.
