Page 90
August 2020 – TD 316 OPERATING MANUAL – Motus Wave Sensor 5729
6.6
Available commands
Available commands and properties for the sensors are given in
chapter 1.7
respectively.
Table 6-2 Available RS-232 commands.
Command
Description
Start
Start a measurement sequence according to current configuration
Stop
Stop a measurement sequence
Do Sample
Calculates and presents a new single set of measurement data. (used in
polled mode).
Do Output
Presents the last set of calculated measurement data (normally only used
in polled mode).
Get
ConfigXML
Outputs information about the configuration properties in XML format
Get
DataXML
Outputs information about available(enabled) parameters in XML format
Get
Property
Output Property value (refer table 1-1), e.g get interval.
Get All
Output information about the configuration properties (same as shown on
Get ConfigXML but without all the metadata)
Get All Parameters
Output information about all parameters value
Set
Property(Value,…,
Value)
Set Property to Value,…, Value (refer table 1-1), eg set interval(60)
Set
Passkey(Value)
Set passkey to change access level
Save
Store current settings
Load
Reloads previous stored settings
Reset
Resets the sensor with last saved new configuration
Help
Print help information
;
Comment string, following characters are ignored
//
Comment string, following characters are ignored
