August 2020 – TD 316 OPERATING MANUAL – Motus Wave Sensor 5729
Page 43
3.8
Deployment Settings
Select
Deployment Settings
by
pressing the
Edit
button under
Deployment Settings
Under the
Sensors
section you will
find a list of all sensors connected
to the logger.
Double-click on the
Wave sensor
icon to select the sensor.
If you don’t find the sensor check
connection and make sure the
sensor are set to
AiCaP mode
.
If you still can’t find the sensor
check that the AiCaP termination is
as recommended.
Please note that you need a power
reset after connecting the sensor.
Figure 3-16: Deployment settings main
Deployment Settings
consist of
only one session;
Site Info
containing four properties:
Figure 3-17: Wave sensor Deployment Settings
