August 2020 – TD 316 OPERATING MANUAL – Motus Wave Sensor 5729
Page 41
An automatic process will start with 6
steps transferring and storing the new
settings in the sensor Flash. If necessary
a reset will be executed. Do not switch
off before the entire process is
completed.
Figure 3-12 Configuration Update
When the updating process is finished a confirmation
will show up. Press
Finish
to continue.
Figure 3-13 Configuration Update Completed
When you click finish the following
warning may show up. Then you
need to open the
Recorder Panel
and select
Stop
or
Stop All Groups
and/or press the
Refresh Status
button.
Figure 3-14: Warning after changing values
