Page 74
August 2020 – TD 316 OPERATING MANUAL – Motus Wave Sensor 5729
•
Serial Port
•
Buoy Settings
•
External Compass
Settings
•
Advanced System
Output
The settings here are mainly used to compensate for influence from the sensor surroundings like off-center mounting
and magnetic influence on the internal compass. The adjustment for use on other buoys that Motus DB 1750 and EMM
2.0 can also be entered here.
For a full description of each property please refer to
chapter 4.6.1
Figure 4-24: User maintenance
4.8.1
Mandatory
Figure 4-25: Mandatory in User Maintenance
All sensors are given a
Node Description
text like Motus #xxx (xxx is the serial number of the sensor). The user can
modify this
Node Description
text if required. Be aware that the
Node Description
changes to
*Corrupt
Configuration
if it has lost the configuration in flash. Contact the factory if this happens. The configuration is saved in
two sectors in flash memory. A flash sector can be corrupted if the power is lost during the saving of new configuration.
The double flash sector saving ensures that it does not lose the configuration. If one of the sectors is corrupted, the
other sector is used and also saved to the corrupt sector.
4.8.2
Site Info
Figure 4-26; Site Info in User Maintenance
