20
143627(A)
Chapter 3 – Monitor Settings
Caution
Leaving your TFT LCD display on constantly can result in temporary image
retention (TIR). TIR can be avoided by using a screen saver, enabling the
idle/doze timeout feature, or by turning off the display when it is not in use.
On-Screen Display (OSD) Switch
The OSD Select switch is located on the I/O panel (see Figure 1-2) and offers
two choices: enable or disable. The keys on the front of the monitor can be
locked-out by setting the OSD switch to disable, or unlocked by setting the
OSD switch to enable.
Caution
Please use the OSD after confirming the position of the
OSD Select Switch
.
Touch data is transmitted to host while OSD menu is displayed.
Mode and Image Adjustment
Not all video controllers produce exactly the same video output levels or the
same timing. The 5019T uses on-screen configuration menus to make setup
and adjustment easy. The menus are selected and the menu items are
adjusted using the buttons located on the front panel of the monitor. With the
OSD enabled, follow the general instructions below to navigate through the
adjustment menus and make adjustments.
Note
If your 5019T monitor has a stainless steel bezel, the OSD controls will be
located on the back of the unit.
