5019T Flat Panel Industrial Touch Monitor Chapter 2 – Installation
17
143627(A)
Safety Agency Approval
The Xycom Automation systems are designed to meet the following
standards:
•
Underwriters Laboratories Inc., UL 1604 Standard for Safety
Electrical equipment for use in Class I and Class II, Division 2,
locations
•
Underwriters Laboratories Inc., UL 508, Information Technology
Equipment
•
Canadian Standard Association, Specification C22.2 No. 213-M1987
Non-incendiary electrical equipment for use in Class I, Division 2
hazardous locations
•
Canadian Standards Association, Specification C22.2 No. 142
Information Technology Equipment
•
EN 60950, Information Technology Equipment
Mounting Options
The 5019T can be mounted in a panel or to an arm. The following sections
describe the two mounting options.
Panel Installation
The 5019T monitor should be mounted and used where NEMA 4 and NEMA
12 type enclosures are employed. When mounted properly, the monitor
meets or exceeds the sealing requirements set forth in the NEMA 4 and
NEMA 12 specifications. The monitor uses "U"-shaped clips and a special
gasket to achieve the proper seal.
Make a cutout in one of the walls of your NEMA enclosure (see Figure 2-2 for
cutout dimensions). Enclosures made of heavier gauge metal work better in
that they won't deform or bend as easily when the monitor's sealing gasket is
compressed.
