XVision X100 Series, User Manual

Page: 63 / 176

X100 Series Main User Manual 63
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FIG
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
CO
N
FIG
U
RE
TOUR SETTING TAB
for X104P and X104S Pan and Tilt IP Cameras
The IP camera can be programmed to move from one preset position to another sequentially, building up
a TOUR. This can be useful if a large area needs to be scanned periodically to specific areas around the
camera. Preset positions must be set BEFORE you can set any tours.
Tour Name
The Tour Name is the ‘group’ name given to a sequence of camera positions. You can set up to 16 tours
with the IP camera. To set up a tour, type in a Tour Name and then click the ADD button. The new tour
will be displayed in the main window above. Select a tour by highlighting it in the main window then
begin to assign preset positions to it using the window on the right hand side.
Running
Enable or disable the Tour selected using the toggle buttons.
Preset
Use this menu to set the sequence of the tour. A maximum of 16 points can be assigned per tour. The
selected preset position is added in the Sequence list from 1 to 16.
Wait Time
Type a period of time during which the camera is to stay at each preset point, between 0 to 36000
seconds.
Add, Modify, and Delete (remove) Tour or Sequence positions
Manage the Tours and Sequence positions using either the left or right window to add or modify tour
details.
Sequence List
shows the Preset
positions assigned
to each tour
Tour Name &
details will be
shown here once
they have been
added