XtremeAIR XA41, Maintenance Manual

Page: 37 / 284

Maintenance Manual XA41/XA42
AMM-XA42-0040-001 C.00
Page date: Page 9
25.09.2018 Chapter 05
WARNING
Description Action Signature
The ends of the aileron control rod turn freely at the left and
right stops
Make sure that the aileron control rod is correctly adjusted.
Incorrect adjustment can cause damage to the rod end housing
and failure of the aileron control
CHECK
Main landing gear, LH and RH CHECK
The retaining pins of the gear leg and the safety wiring are
correctly installed
CHECK
Gear leg: The engine mount bushing is correctly installed CHECK
The fairings are correctly installed CHECK
The brakes operate correctly
The brake linings are satisfactory
CHECK, if
necessary
REPLACE
The condition of the tyre is satisfactory and the pressure is
correct
CHECK
The slipmarks on the tyre and on the rim are aligned CHECK
Wheel nut: The split pin is correctly installed CHECK
Exhaust, LH and RH
The condition of the exhaust is satisfactory and it is correctly
installed
CHECK
The EGT sensors are correctly installed. The routing of the
adjacent cables is correct
CHECK
The smoke lines are correctly connected CHECK
Engine mount, shock mounts
The condition of the engine- and shock- mounts is satisfactory
and they are correctly installed
CHECK
Oil cooler, LH and RH
The coolers are correctly installed and do not leak CHECK
The oil coolers are correctly sealed. Silicone is applied to the
outlet lip
CHECK
The oil hoses have the correct routing, are correctly connected
and have no signs of leaks
CHECK
Engine Baffling
The baffling parts are correctly installed CHECK
The fairleads for the ignition harness and the propeller cable
are correctly installed
CHECK
Engine
Oil filter (if installed) REPLACE
Oil spectral analysis (recommended) PERFORM
The mixture control is correctly installed CHECK
The propeller control is correctly installed CHECK
The throttle control is correctly installed CHECK