Maintenance Manual XA41/XA42
AMM-XA42-0040-001 C.00
Page
24
Page date:
Chapter 27
25.09.2018
4
Remove all lateral access panels in the cockpit to get a better access.
5
Install the other control cable end on the lever in the side wall of the rear cockpit,
refer to Figure 27-21.
6
To adjust the correct length of the cable: Move the rudder to the right. Put the lever
in the side wall with a minimum distance of 5mm to the frame directly aft of it.
7
Adjust the control cable length: Tighten the XA42-2720-265 rod end on the cable
end and lock it in the correct position with an AN-315-4 counter nut.
8
Install the rod end of the control cable on the lever, refer to Figure 27-21.
Figure 27-21: Left control cables installation to the fuselage side wall lever.
9.
Do the installation steps 2 to 8 for the middle control cable (XA42-2720-253). Install
the cable first on the lever in the side wall of the rear cockpit (refer to Figure 27-21).
Then install the cable with the lever on the front pedal (refer to Figure 27-22).
10.
To adjust the correct length of the cable: Move the rudder to the left and the front
pedal forward. The clearance distance between the most forward point of the
actuation bar of the front rudder pedal and the firewall must be a minimum of
30mm.
11.
Do the same installation procedure for the control cables on the right side of the
fuselage.
XA42-2720-255
XA42-2720-265
AN-315-4
AN4-10A
AN960-416L
AN310-4
DIN 94 2x12
XA42-2720-253
AN4-10A
AN960-416L
AN310-4
DIN 94 2x12
Summary of Contents for XA41
Page 281: ...Maintenance Manual XA41 XA42 AMM XA42 0040 001 C 00 Page 18 Page date Appendix 24 09 2018 ...
Page 282: ...Maintenance Manual XA41 XA42 AMM XA42 0040 001 C 00 Page date Page 19 24 09 2018 Appendix ...
Page 283: ...Maintenance Manual XA41 XA42 AMM XA42 0040 001 C 00 Page 20 Page date Appendix 24 09 2018 ...
Page 284: ...Maintenance Manual XA41 XA42 AMM XA42 0040 001 C 00 Page date Page 21 24 09 2018 Appendix ...