XtremeAIR XA41, Maintenance Manual

Page: 121 / 284

Maintenance Manual XA41/XA42
AMM-XA42-0040-001 C.00
Page date: Page 19
25.09.2018 Chapter 27
To remove the front rudder pedals (XA42 only):
1
Disconnect the forward control cable loop.
2 Disconnect the middle control cable.
3 Remove the bolt connection from the hinge point of the front rudder pedal. Refer
Figure 27-15, pos. 1.
4 Assemble the front rudder pedals in the opposite sequence.
5 Make sure that the pedals move freely from stop to stop.
Figure 27-15: Front right rudder pedal (XA42)
To remove the rear rudder pedals:
1
Disconnect the top connection of the brake cylinder from the pedal.
2 Remove the AN23-18A screw connection that safeties the hinge bolt. Refer Figure
27-16, pos. 1.
3 Remove the hinge bolt.
4 Remove the pedal.
5 Assemble the rear rudder pedals in the opposite sequence with a new MS21083N3
locking nut. Refer to Figure 27-16, pos. 2.
6 Make sure that the pedals can move freely after the installation of the hinge bolt.
Figure 27-16: Rear left rudder pedal (XA42)
1
1
2