XtendLan xl-raid-2804issa Installation And Configuration Manual Download Page 45

Page: 45 / 124

It can be reused after setting it to “FR” manually.

Status 2

“R”



ebuild. The hard drive is doing rebuilding.

“M”



igration. The hard drive is doing migration.

Speed

3.0G



From SATA ATAPI standard, if the disk can support ATAPI

IDENTIFY PACKET DEVICE command, and the speed can achieve

Serial ATA Gen-2 signaling speed (3.0Gbps).

1.5G



From SATA ATAPI standard, if the disk can support ATAPI

IDENTIFY PACKET DEVICE command, and the speed can achieve

Serial ATA Gen-1 signaling speed (1.5Gbps).

Unknown



The disk doesn’t support above command, so the

speed is defined as unknown.

PD operations description:

FREE DISC

Make the selected hard drive to be free for use.

GLOBAL

SPARES

Set the selected hard drive(s) to global spare of all VGs.

DEDICATED

SPARES

Set hard drive(s) to dedicated spare of selected VGs.

XL-RAID-2804ISSA also provides HDD auto spin down function to save power. The default

value is disabled. User can set up in physical disk page, too.

3.6.3 Volume Group

Enter

“Volume group”

to view the status of each volume group.

VG column description:

Summary of Contents for xl-raid-2804issa





























































































































Search results

Summary of Contents for xl-raid-2804issa

Reviews:

Related manuals for xl-raid-2804issa

Brands by name

Popular brands

XtendLan xl-raid-2804issa, Installation And Configuration Manual

Search results

Summary of Contents for xl-raid-2804issa

Reviews:

Related manuals for xl-raid-2804issa

Brands by name

Popular brands