XtendLan xl-raid-2804issa, Installation And Configuration Manual, Page: 24 / 124

24
1. Link to download the Microsoft iSCSI software initiator:
http://www.microsoft.com/downloads/details.aspx?FamilyID=12cb3c1a-15d6-4585-b385-
befd1319f825&DisplayLang=en
Please refer to Appendix D for Microsoft iSCSI initiator installation procedure.
2. Linux iSCSI initiator is also available. For different kernels, there are different iSCSI drivers. If
you need the latest Linux iSCSI initiator, please visit Open-iSCSI project for most update
information. Linux-iSCSI (sfnet) and Open-iSCSI projects merged in April 11, 2005.
Open-iSCSI website: http://www.open-iscsi.org/
Open-iSCSI README: http://www.open-iscsi.org/docs/README
Features: http://www.open-iscsi.org/cgi-bin/wiki.pl/Roadmap
Support Kernels:
http://www.open-iscsi.org/cgi-bin/wiki.pl/Supported_Kernels
Google groups:
http://groups.google.com/group/open-iscsi/threads?gvc=2
http://groups.google.com/group/open-iscsi/topics
Open-iSCSI Wiki: http://www.open-iscsi.org/cgi-bin/wiki.pl
3. ATTO iSCSI initiator is available for Mac.
Website: http://www.attotech.com/xtend.html
2.8 Management Methods
There are three management methods to manage XL-RAID-2804ISSA, describe in the following:
2.8.1 Web GUI
XL-RAID-2804ISSA support graphical user interface to manage the system. Be sure to connect LAN
cable to your R-Link port. The default setting of management port IP is DHCP and the DHCP
address displays on LCM; user can check LCM for the IP first, then open the browser and type the
DHCP address: (The DHCP address is dynamic and user may need to check every time after reboot
again.) When DHCP service is not available, XL-RAID-2804ISSA uses zero config (Zeroconf) to get
an
IP address.
E.g., on LCM. XL-RAID-2804ISSA gets a DHCP address 192.168.10.50 from DHCP server.
192.168.10.50
XL-RAID-2804ISSA
←
http://192.168.10.50 or https://192.168.10.50 (https: connection with encrypted
Secure Sockets Layer (SSL). Please be aware of the https function is slower than http.)