XtendLan xl-raid-2804issa Installation And Configuration Manual Download Page 34

Page: 34 / 124

3.4.4 Login Config

Select

“Login config”

is to set only one admin and set the auto logout timing. The only one

admin can prevent multiple users access the same controller in the same time.

1. Auto logout: Options are (1) Disable (2) 5 mins (3) 30 mins (4) 1 hour. When user is no

response for a period of time, the system will logout automatically to allow another user to

2. Login lock: Disable/Enable. When the login lock is enabled, the system allows only one

user to login/modify the system settings.

3.4.5 Password

Select

“Password”

is for changing administrator password. The maximum length of admin

password is 12 characters.

3.4.6 Date

Select

“Date”

to set up the current date, time, time zone, and NTP server before using.

Summary of Contents for xl-raid-2804issa





























































































































Search results

Summary of Contents for xl-raid-2804issa

Reviews:

Related manuals for xl-raid-2804issa

Brands by name

Popular brands

XtendLan xl-raid-2804issa, Installation And Configuration Manual

Search results

Summary of Contents for xl-raid-2804issa

Reviews:

Related manuals for xl-raid-2804issa

Brands by name

Popular brands