7
1.2 Technical Specifications
Form Factor: 2U 19-inch rackmount chassis
RAID processor: Intel IOP341 64-bit
RAID Level: 0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD
N-way mirror (N copies of the disk)
Cache memory: 512MB ~ 2GB DDR II
No. of channels (host + drive): 2 + 8
Host bus interface: 1Gb/s Ethernet
Drive bus interface: 3Gb/s SATA II
Hot-swap drive trays: Eight (8) 1-inch trays
Host access control: Read-Write & Read-Only
Supports CHAP authentication
802.3ad port trunking, LACP support
Jumbo frame support
Maximum logical volume: up to 256
Maximum host connection: up to 32
Maximum host clustering: up to 8 for one logical volume
Manual/scheduling volume snapshot: up to 32
Snapshot rollback mechanism support
Supports Microsoft Multipath I/O (MPIO)
Global/dedicated cache configurable by volume
Global and dedicated hot spare disks
Online Volume migration
Online Volume sets expansion
Configurable stripe size
Instant RAID volume availability and background initialization support
Supports over 2TB per volume
Online consistency check
Bad block auto-remapping
S.M.A.R.T. support
Summary of Contents for xl-raid-2804issa
