XTEMP ENVIRONMENTS (SHANGHAI) CO., LTD.
http://www.xtemp-usa.com/
21
/
31
DSGO0708-2-V211119/UXP8011-CD6400/CLASS I/NFL/RT+5~+100°C
Chapter 3 Controller Descriptions and Operation
3
+
6
Initiate or
terminate
programming
Press
and
at the same time
and release the
buttons
The temperature program may be initiated
either in standby mode or running mode. If
Auto
setting is
Aon
, the equipment will
automatically resume to the mode before
the program is initiated once the program is
terminated automatically. The setting of
Auto
=
Aon
is recommended, if continuous
operation is desired after unexpected
interruption of short power failure.
+
7
Initiate or
terminate the
timer
Press
and
at
the same time, then
release the buttons
The timer function is optional. When the
equipment is in running mode, timer for
ASd
is
valid, while the equipment is in standby mode,
timer for
AS
is valid. The time is set by
AS
and
ASd
.
8
Move between
settings or
increase the
value
Press the key shortly
for slow movement
and continuously for
fast changing
9
Move between
settings or
decrease the
value
Press the key shortly
for slow movement
and continuously for
fast changing
3.2 Set the working parameters
1)
Set the working temperature
Refer to item No.2 in the table.
2)
Set high temperature limit value
Press
for more than 2 seconds until
Ht
is displayed. Press
to enter
Ht
setting. Original
Ht
value is displayed, and press
to get the desired value. Press
to confirm
and exit the
SEt
screen or exit automatically in 4 seconds.
3)
Set low temperature limit value
Press
for more than 2 seconds until
Ht
is displayed. Scroll the menu by
until screen
displays
Lt
. Press
to enter
Lt
setting. Original
Lt
value is displayed, press
to
